Skip to main content
Nimbus Novelty

How to Apply & Care for Your Stickers

Get the most out of your Nimbus Novelty vinyl stickers with these application tips and care instructions.

Waterproof
UV Resistant
Dishwasher Safe
Lasts 3-5 Years

1. Surface Preparation

A clean surface is the single most important factor for a sticker that stays put. Wipe down the area with rubbing alcohol or soap and water, then dry it completely before applying.

Best surfaces

  • Laptops and laptop cases
  • Water bottles and tumblers
  • Car bumpers and windows
  • Phone cases
  • Notebooks and planners
  • Windows and mirrors

Surfaces to avoid

  • Heavily textured surfaces
  • Fabric and clothing
  • Unsealed or raw wood

2. How to Apply

1

Peel

Peel the sticker from the backing at a 45-degree angle. Try not to touch the adhesive side.

2

Position

Place the sticker carefully where you want it. Vinyl stickers are repositionable for a few seconds, so you have a brief window to adjust.

3

Press

Press firmly from the center outward to push out air bubbles. Use a credit card edge or squeegee to smooth out any remaining bubbles.

4

Heat (optional)

For curved surfaces like water bottles or helmets, use a hair dryer on low heat to help the vinyl conform to the shape.

3. Removing Stickers

  1. Heat the sticker with a hair dryer for about 30 seconds to loosen the adhesive.
  2. Peel slowly at a low angle, pulling the sticker back on itself rather than straight up.
  3. Clean any remaining residue with rubbing alcohol or an adhesive remover.

4. Care & Longevity

Our stickers are made from premium vinyl that is waterproof, UV-resistant, and dishwasher safe. With a little care they will look great for years.

  • Hand washing is preferred for maximum longevity on water bottles and tumblers.
  • Avoid pressure washers and abrasive scrubbers directly on the sticker.
  • Outdoor lifespan: 3-5 years with normal sun and weather exposure.
  • Indoor lifespan: 5+ years on laptops, notebooks, and other indoor surfaces.

5. Pro Tips

  • Apply in room temperature (60-80 °F / 15-27 °C) for the best adhesion.
  • Wait 24 hours before exposing a newly applied sticker to water.
  • Layer stickers for a custom collage look -- overlap edges or arrange in clusters.
  • Small air bubbles often disappear on their own within 24-48 hours.

Ready to put them to work?

Browse Stickers

Have a question about application or care? Contact us and we are happy to help.